Price & Ordering: Faktum High Gloss Fronts
Alvic Luxe High Gloss Cabinet Doors And Fronts for IKEA Faktum Kitchens
- On this page we list doors and fronts made in High Gloss colours.
We are very proud to be able to offer fronts based on the reputable Alvic manufacturer. Alvic are normally just availabe in high end architect kitchens. - The fronts works fine with a Push Open solution or may be retrofitted with knobs or pull-handles. Will be pre-drilled from the factory for hinges and for drawers and just like with fronts from IKEA the drillings for the specific pull handles are always made on site by the end user.
- These fronts are for the Faktum kitchen range that was discontinued from the IKEA warehouses back in 2013. Keep the kitchen you already own. Just replace the fronts!
- The fronts will be made in the correct size by IKEA´s original drawings and pre drilled by IKEAs templates. They will all fit perfectly out of the box just as if they were picked up from the local IKEA warehouse.
- All the fronts on this page will be made in the High Gloss colour selected at Step #1 below. The chosen colour will show in the cart at €0.
- This page may be utilised to price your project. Please just add all the needed sizes of the fronts into a cart and the system will calculate the total cost automatically. At the Checkout page you may finalize your order or save your cart for later.
- On this page we list doors and fronts made in High Gloss colours.
We are very proud to be able to offer fronts based on the reputable Alvic manufacturer. Alvic are normally just availabe in high end architect kitchens. - The fronts works fine with a Push Open solution or may be retrofitted with knobs or pull-handles. Will be pre-drilled from the factory for hinges and for drawers and just like with fronts from IKEA the drillings for the specific pull handles are always made on site by the end user.
- These fronts are for the Faktum kitchen range that was discontinued from the IKEA warehouses back in 2013. Keep the kitchen you already own. Just replace the fronts!
- The fronts will be made in the correct size by IKEA´s original drawings and pre drilled by IKEAs templates. They will all fit perfectly out of the box just as if they were picked up from the local IKEA warehouse.
- All the fronts on this page will be made in the High Gloss colour selected at Step #1 below. The chosen colour will show in the cart at €0.
- This page may be utilised to price your project. Please just add all the needed sizes of the fronts into a cart and the system will calculate the total cost automatically. At the Checkout page you may finalize your order or save your cart for later.
Step #1: Colour selection
Please start off the ordering process by selecting your preferred High Gloss Colour for the new fronts here. The selected colour will apply to all the fronts in the same cart.
STEP #2: DRAWER FRONTS
Add some drawer fronts to the cart. Will be made in the chosen colour from Step #1 above. The fronts are prices by the size, not by the colour. Listed in tabs by the outside width of the cabinet they are intended to be fitted to. Just like IKEA we make the fronts a few millimeter smaller compared to the width of the cabinet so they are possible to open and close properly. In fact they will be manuafactured to the correct size by IKEAs original drawings and pre-drilled for the original IKEA Rationell drawers according to IKEAs original templates.
These new drawer fronts will fit in a 30 cm wide cabinet. Please use the format Width x Height (not vice versa).
| Drawer fronts for 30 cm wide cabinets | Size in mm | Price | |
|---|---|---|---|
| Drawer Front Faktum Gloss 30×13 | 295×126 | 45,00 € | |
| Drawer Front Faktum Gloss 30×18 | 295×182 | 55,00 € | |
| Drawer Front Faktum Gloss 30×25 | 295×254 | 69,00 € | |
| Drawer Front Faktum Gloss 30×31 | 295×310 | 79,00 € | |
| Drawer Front Faktum Gloss 30×57 | 295×566 | 109,00 € | |
| Drawer Front Faktum Gloss 30×70 | 295×694 | 119,00 € |
Not finding the size you are looking for? We make odd/ custom sizes as well
Read more
Not finding the perfect size that you are looking for? Not a problem. Besides all the original IKEA-sizes we are also able to make “any” size by the millimeter. This is a service for what we do not charge any extra.
Most kitchens need one or more fronts made in another size compared to the sizes originally offered by IKEA. Usually around the fridge/ freezer, oven, micro or the extractor hood etc. Cutting yourself on site will leave the new front without the paint and with a rough, cut edge. Since we produce on order we are able to make “any” size and this is a service for what we do not charge any extra. Please just add the closest larger front into the cart. Proceed to the Checkout page. There you will find a message text box. Please just mention the original size + your preferred measurements by the millimeter and in the format Width x Height (not vice versa). NO ROUNDING OF THE MEASUREMENTS. We will make the new front in the production exactly by the millimeter and it will not look cut or cropped. The selected color will be applied afterwards just like with the original sized fronts.
These new drawer fronts will fit in a 40 cm wide cabinet. Please use the format Width x Height (not vice versa).
| Drawer fronts for 40 cm wide cabinets | Size in mm | Price | |
|---|---|---|---|
| Drawer Front Faktum Gloss 40×13 | 395×126 | 49,00 € | |
| Drawer Front Faktum Gloss 40×18 | 395×182 | 59,00 € | |
| Drawer Front Faktum Gloss 40×25 | 395×254 | 75,00 € | |
| Drawer Front Faktum Gloss 40×31 | 395×310 | 79,00 € | |
| Drawer Front Faktum Gloss 40×57 | 395×566 | 109,00 € | |
| Drawer Front Faktum Gloss 40×70 | 395×694 | 125,00 € |
Not finding the size you are looking for? We make odd/ custom sizes as well
Read more
Not finding the perfect size that you are looking for? Not a problem. Besides all the original IKEA-sizes we are also able to make “any” size by the millimeter. This is a service for what we do not charge any extra.
Most kitchens need one or more fronts made in another size compared to the sizes originally offered by IKEA. Usually around the fridge/ freezer, oven, micro or the extractor hood etc. Cutting yourself on site will leave the new front without the paint and with a rough, cut edge. Since we produce on order we are able to make “any” size and this is a service for what we do not charge any extra. Please just add the closest larger front into the cart. Proceed to the Checkout page. There you will find a message text box. Please just mention the original size + your preferred measurements by the millimeter and in the format Width x Height (not vice versa). NO ROUNDING OF THE MEASUREMENTS. We will make the new front in the production exactly by the millimeter and it will not look cut or cropped. The selected color will be applied afterwards just like with the original sized fronts.
These new drawer fronts will fit in a 45 cm wide cabinet. Please use the format Width x Height (not vice versa).
| Drawer fronts for 45 cm wide cabinets | Size in mm | Price | |
|---|---|---|---|
| Drawer Front Faktum Gloss 45×13 | 445×126 | 55,00 € | |
| Drawer Front Faktum Gloss 45×18 | 445×182 | 59,00 € | |
| Drawer Front Faktum Gloss 45×25 | 445×254 | 79,00 € | |
| Drawer Front Faktum Gloss 45×31 | 445×310 | 85,00 € | |
| Drawer Front Faktum Gloss 45×57 | 445×566 | 125,00 € | |
| Drawer Front Faktum Gloss 45×70 | 445×694 | 149,00 € |
Not finding the size you are looking for? We make odd/ custom sizes as well
Read more
Not finding the perfect size that you are looking for? Not a problem. Besides all the original IKEA-sizes we are also able to make “any” size by the millimeter. This is a service for what we do not charge any extra.
Most kitchens need one or more fronts made in another size compared to the sizes originally offered by IKEA. Usually around the fridge/ freezer, oven, micro or the extractor hood etc. Cutting yourself on site will leave the new front without the paint and with a rough, cut edge. Since we produce on order we are able to make “any” size and this is a service for what we do not charge any extra. Please just add the closest larger front into the cart. Proceed to the Checkout page. There you will find a message text box. Please just mention the original size + your preferred measurements by the millimeter and in the format Width x Height (not vice versa). NO ROUNDING OF THE MEASUREMENTS. We will make the new front in the production exactly by the millimeter and it will not look cut or cropped. The selected color will be applied afterwards just like with the original sized fronts.
These new drawer fronts will fit in a 50 cm wide cabinet. Please use the format Width x Height (not vice versa).
| Drawer fronts for 50 cm wide cabinets | Size in mm | Price | |
|---|---|---|---|
| Drawer Front Faktum Gloss 50×13 | 495×126 | 55,00 € | |
| Drawer Front Faktum Gloss 50×18 | 495×182 | 59,00 € | |
| Drawer Front Faktum Gloss 50×25 | 495×254 | 79,00 € | |
| Drawer Front Faktum Gloss 50×31 | 495×310 | 85,00 € | |
| Drawer Front Faktum Gloss 50×57 | 495×566 | 125,00 € | |
| Drawer Front Faktum Gloss 50×70 | 495×694 | 149,00 € |
Not finding the size you are looking for? We make odd/ custom sizes as well
Read more
Not finding the perfect size that you are looking for? Not a problem. Besides all the original IKEA-sizes we are also able to make “any” size by the millimeter. This is a service for what we do not charge any extra.
Most kitchens need one or more fronts made in another size compared to the sizes originally offered by IKEA. Usually around the fridge/ freezer, oven, micro or the extractor hood etc. Cutting yourself on site will leave the new front without the paint and with a rough, cut edge. Since we produce on order we are able to make “any” size and this is a service for what we do not charge any extra. Please just add the closest larger front into the cart. Proceed to the Checkout page. There you will find a message text box. Please just mention the original size + your preferred measurements by the millimeter and in the format Width x Height (not vice versa). NO ROUNDING OF THE MEASUREMENTS. We will make the new front in the production exactly by the millimeter and it will not look cut or cropped. The selected color will be applied afterwards just like with the original sized fronts.
These new drawer fronts will fit in a 60 cm wide cabinet. Please use the format Width x Height (not vice versa).
| Drawer fronts for 60 cm wide cabinets | Size in mm | Price | |
|---|---|---|---|
| Drawer Front Faktum Gloss 60×9 | 595×94 | 49,00 € | |
| Drawer Front Faktum Gloss 60×13 | 595×126 | 55,00 € | |
| Drawer Front Faktum Gloss 60×18 | 595×182 | 59,00 € | |
| Drawer Front Faktum Gloss 60×25 | 595×254 | 79,00 € | |
| Drawer Front Faktum Gloss 60×31 | 595×310 | 85,00 € | |
| Drawer Front Faktum Gloss 60×57 | 595×566 | 125,00 € | |
| Drawer Front Faktum Gloss 60×70 | 595×694 | 149,00 € |
Not finding the size you are looking for? We make odd/ custom sizes as well
Read more
Not finding the perfect size that you are looking for? Not a problem. Besides all the original IKEA-sizes we are also able to make “any” size by the millimeter. This is a service for what we do not charge any extra.
Most kitchens need one or more fronts made in another size compared to the sizes originally offered by IKEA. Usually around the fridge/ freezer, oven, micro or the extractor hood etc. Cutting yourself on site will leave the new front without the paint and with a rough, cut edge. Since we produce on order we are able to make “any” size and this is a service for what we do not charge any extra. Please just add the closest larger front into the cart. Proceed to the Checkout page. There you will find a message text box. Please just mention the original size + your preferred measurements by the millimeter and in the format Width x Height (not vice versa). NO ROUNDING OF THE MEASUREMENTS. We will make the new front in the production exactly by the millimeter and it will not look cut or cropped. The selected color will be applied afterwards just like with the original sized fronts.
These new drawer fronts will fit in a 80 cm wide cabinet. Please use the format Width x Height (not vice versa).
| Drawer fronts for 80 cm wide cabinets | Size in mm | Price | |
|---|---|---|---|
| Drawer Front Faktum Gloss 80×13 | 795×126 | 75,00 € | |
| Drawer Front Faktum Gloss 80×18 | 795×182 | 85,00 € | |
| Drawer Front Faktum Gloss 80×25 | 795×254 | 89,00 € | |
| Drawer Front Faktum Gloss 80×31 | 795×310 | 99,00 € | |
| Drawer Front Faktum Gloss 80×57 | 795×566 | 135,00 € |
Not finding the size you are looking for? We make odd/ custom sizes as well
Read more
Not finding the perfect size that you are looking for? Not a problem. Besides all the original IKEA-sizes we are also able to make “any” size by the millimeter. This is a service for what we do not charge any extra.
Most kitchens need one or more fronts made in another size compared to the sizes originally offered by IKEA. Usually around the fridge/ freezer, oven, micro or the extractor hood etc. Cutting yourself on site will leave the new front without the paint and with a rough, cut edge. Since we produce on order we are able to make “any” size and this is a service for what we do not charge any extra. Please just add the closest larger front into the cart. Proceed to the Checkout page. There you will find a message text box. Please just mention the original size + your preferred measurements by the millimeter and in the format Width x Height (not vice versa). NO ROUNDING OF THE MEASUREMENTS. We will make the new front in the production exactly by the millimeter and it will not look cut or cropped. The selected color will be applied afterwards just like with the original sized fronts.
Fronts for integrated dishwashers
Read more
The only difference compared to a regular door or a drawer front are the drillings The fronts intended for dishwashers are always made without any hinge drillings or any drawer drillings. Instead please just use the fittings provided along with the dishwasher itself. This is because all the different brands of washers have their own idea on how to fit a front to their machine. Please refer to the fitting instruction provided with the new dishwasher. If a regular door or a regular drawer front is used insted, that might work just fine. But the empty hinge holes might take in moisture from behind that potentially can ruin the door after some time of use.
| Fronts for integrated dishwashers | Size in mm | VAT Incl. | |
|---|---|---|---|
| Front for int. dishwasher Gloss 45×57 | 445×566 | 125,00 € | |
| Front for int. dishwasher Gloss 45×70 | 445×694 | 149,00 € | |
| Front for int. dishwasher Gloss 50×70 | 495×694 | 149,00 € | |
| Front for int. dishwasher Gloss 60×57 | 595×566 | 125,00 € | |
| Front for int. dishwasher Gloss 60×70 | 595×694 | 149,00 € |
Not finding the size you are looking for? We make odd/ custom sizes as well
Read more
Not finding the perfect size that you are looking for? Not a problem. Besides all the original IKEA-sizes we are also able to make “any” size by the millimeter. This is a service for what we do not charge any extra.
Most kitchens need one or more fronts made in another size compared to the sizes originally offered by IKEA. Usually around the fridge/ freezer, oven, micro or the extractor hood etc. Cutting yourself on site will leave the new front without the paint and with a rough, cut edge. Since we produce on order we are able to make “any” size and this is a service for what we do not charge any extra. Please just add the closest larger front into the cart. Proceed to the Checkout page. There you will find a message text box. Please just mention the original size + your preferred measurements by the millimeter and in the format Width x Height (not vice versa). NO ROUNDING OF THE MEASUREMENTS. We will make the new front in the production exactly by the millimeter and it will not look cut or cropped. The selected color will be applied afterwards just like with the original sized fronts.
STEP #3: DOORS
Add some doors to the cart. Will be made in the chosen colour from Step #1 above. The fronts are prices by the size, not by the colour. Listed in tabs by the outside width of the cabinet they are intended to be fitted to. Just like IKEA we make the fronts a few millimeter smaller compared to the width of the cabinet so they are possible to open and close properly. In fact they will be manuafactured to the correct size by IKEAs original drawings and pre-drilled for the original IKEA FAktum hinges according to IKEAs original templates.
These new doors will fit in a 15 or 20 cm wide cabinet. Please use the format Width x Height (not vice versa).
| Doors for 15-20 cm wide cabinets | Size in mm | Price | |
|---|---|---|---|
| Door Faktum Gloss 15×70 | 146×694 | 105,00 € | |
| Door Faktum Gloss 20×70 | 196×694 | 109,00 € | |
| Door Faktum Gloss 20×92 | 196×918 | 149,00 € |
Not finding the size you are looking for? We make odd/ custom sizes as well
Read more
Not finding the perfect size that you are looking for? Not a problem. Besides all the original IKEA-sizes we are also able to make “any” size by the millimeter. This is a service for what we do not charge any extra.
Most kitchens need one or more fronts made in another size compared to the sizes originally offered by IKEA. Usually around the fridge/ freezer, oven, micro or the extractor hood etc. Cutting yourself on site will leave the new front without the paint and with a rough, cut edge. Since we produce on order we are able to make “any” size and this is a service for what we do not charge any extra. Please just add the closest larger front into the cart. Proceed to the Checkout page. There you will find a message text box. Please just mention the original size + your preferred measurements by the millimeter and in the format Width x Height (not vice versa). NO ROUNDING OF THE MEASUREMENTS. We will make the new front in the production exactly by the millimeter and it will not look cut or cropped. The selected color will be applied afterwards just like with the original sized fronts.
These new doors are intended to be fitted in a 30 or a 60 cm wide cabinet. Please use the format Width x Height (not vice versa).
| Doors for 30 or 60 cm wide cabinets | Size in mm | Price | |
|---|---|---|---|
| Door Faktum Gloss 30×57 | 296×566 | 109,00 € | |
| Door Faktum Gloss 30×70 | 296×694 | 115,00 € | |
| Door Faktum Gloss 30×92 | 296×918 | 159,00 € |
| Corner Cabinet Doors | Size in mm | Price | |
|---|---|---|---|
| Door Faktum Gloss 32×70 | 317×694 | 119,00 € | Options |
| Door Faktum Gloss 32×92 | 317×918 | 163,00 € | Options |
| Folding Door Faktum Gloss 30×70 A | 296×694 | 119,00 € | Options |
| Folding Door Faktum Gloss 30×70 B | 296×694 | 119,00 € | Options |
Not finding the size you are looking for? We make odd/ custom sizes as well
Read more
Not finding the perfect size that you are looking for? Not a problem. Besides all the original IKEA-sizes we are also able to make “any” size by the millimeter. This is a service for what we do not charge any extra.
Most kitchens need one or more fronts made in another size compared to the sizes originally offered by IKEA. Usually around the fridge/ freezer, oven, micro or the extractor hood etc. Cutting yourself on site will leave the new front without the paint and with a rough, cut edge. Since we produce on order we are able to make “any” size and this is a service for what we do not charge any extra. Please just add the closest larger front into the cart. Proceed to the Checkout page. There you will find a message text box. Please just mention the original size + your preferred measurements by the millimeter and in the format Width x Height (not vice versa). NO ROUNDING OF THE MEASUREMENTS. We will make the new front in the production exactly by the millimeter and it will not look cut or cropped. The selected color will be applied afterwards just like with the original sized fronts.
These new doors will fit in a 40 cm wide cabinet. Please use the format Width x Height (not vice versa).
| Doors for 40 cm wide cabinets | Size in mm | Price | |
|---|---|---|---|
| Door Faktum Gloss 40×57 | 396×566 | 105,00 € | |
| Door Faktum Gloss 40×70 | 396×694 | 125,00 € | |
| Door Faktum Gloss 40×92 | 396×918 | 175,00 € |
| Doors for 40 cm wide TALL cabinets | Size in mm | Price | |
|---|---|---|---|
| Door Faktum Gloss 40×90 | 396x900 | 175,00 € | Options |
| Front Faktum Gloss 40×125 | 396×1245 | 229,00 € | Options |
| Front Faktum Gloss 40×195 | 396×1942 | 279,00 € | Options |
Not finding the size you are looking for? We make odd/ custom sizes as well
Read more
Not finding the perfect size that you are looking for? Not a problem. Besides all the original IKEA-sizes we are also able to make “any” size by the millimeter. This is a service for what we do not charge any extra.
Most kitchens need one or more fronts made in another size compared to the sizes originally offered by IKEA. Usually around the fridge/ freezer, oven, micro or the extractor hood etc. Cutting yourself on site will leave the new front without the paint and with a rough, cut edge. Since we produce on order we are able to make “any” size and this is a service for what we do not charge any extra. Please just add the closest larger front into the cart. Proceed to the Checkout page. There you will find a message text box. Please just mention the original size + your preferred measurements by the millimeter and in the format Width x Height (not vice versa). NO ROUNDING OF THE MEASUREMENTS. We will make the new front in the production exactly by the millimeter and it will not look cut or cropped. The selected color will be applied afterwards just like with the original sized fronts.
These new doors will fit in a 45 cm wide cabinet. Please use the format Width x Height (not vice versa).
| Doors for 45 cm wide cabinets | Size in mm | Price | |
|---|---|---|---|
| Door Faktum Gloss 45×70 | 446×694 | 149,00 € | |
| Door Faktum Gloss 45×92 | 446×918 | 185,00 € |
Fronts for dishwashers and washing machines are listed among the drawer fronts (Step #2 above).
These new doors will fit in a 50 cm wide cabinet. Please use the format Width x Height (not vice versa).
| Doors for 50 cm wide cabinets | Size in mm | Price | |
|---|---|---|---|
| Door Faktum Gloss 50×57 | 496×566 | 125,00 € | |
| Door Faktum Gloss 50×70 | 496×694 | 149,00 € | |
| Door Faktum Gloss 50×92 | 496×918 | 185,00 € |
| Doors for 50 cm wide TALL cabinets | Size in mm | Price | |
|---|---|---|---|
| Door Faktum Gloss 50×90 | 496x900 | 185,00 € | Options |
| Front Faktum Gloss 50×125 | 496×1245 | 249,00 € | Options |
| Front Faktum Gloss 50×195 | 496×1942 | 299,00 € | Options |
Not finding the size you are looking for? We make odd/ custom sizes as well
Read more
Not finding the perfect size that you are looking for? Not a problem. Besides all the original IKEA-sizes we are also able to make “any” size by the millimeter. This is a service for what we do not charge any extra.
Most kitchens need one or more fronts made in another size compared to the sizes originally offered by IKEA. Usually around the fridge/ freezer, oven, micro or the extractor hood etc. Cutting yourself on site will leave the new front without the paint and with a rough, cut edge. Since we produce on order we are able to make “any” size and this is a service for what we do not charge any extra. Please just add the closest larger front into the cart. Proceed to the Checkout page. There you will find a message text box. Please just mention the original size + your preferred measurements by the millimeter and in the format Width x Height (not vice versa). NO ROUNDING OF THE MEASUREMENTS. We will make the new front in the production exactly by the millimeter and it will not look cut or cropped. The selected color will be applied afterwards just like with the original sized fronts.
These new doors will fit in a 60 cm wide cabinet. Please use the format Width x Height (not vice versa).
| Doors for 60 cm wide cabinets | Size in mm | Price | select |
|---|---|---|---|
| Door Faktum Gloss 60×35 | 596×342 | 89,00 € | |
| Door Faktum Gloss 60×57 | 596×566 | 125,00 € | |
| Door Faktum Gloss 60×70 | 596×694 | 149,00 € | |
| Door Faktum Gloss 60×92 | 596×918 | 185,00 € |
| Doors for 60 cm wide TALL cabinets | Size in mm | Price | |
|---|---|---|---|
| Door Faktum Gloss 60×90 | 596×900 | 185,00 € | Options |
| Front Faktum Gloss 60×125 | 596×1245 | 249,00 € | Options |
| Front Faktum Gloss 60×195 | 596×1942 | 299,00 € | Options |
Not finding the size you are looking for? We make odd/ custom sizes as well
Read more
Not finding the perfect size that you are looking for? Not a problem. Besides all the original IKEA-sizes we are also able to make “any” size by the millimeter. This is a service for what we do not charge any extra.
Most kitchens need one or more fronts made in another size compared to the sizes originally offered by IKEA. Usually around the fridge/ freezer, oven, micro or the extractor hood etc. Cutting yourself on site will leave the new front without the paint and with a rough, cut edge. Since we produce on order we are able to make “any” size and this is a service for what we do not charge any extra. Please just add the closest larger front into the cart. Proceed to the Checkout page. There you will find a message text box. Please just mention the original size + your preferred measurements by the millimeter and in the format Width x Height (not vice versa). NO ROUNDING OF THE MEASUREMENTS. We will make the new front in the production exactly by the millimeter and it will not look cut or cropped. The selected color will be applied afterwards just like with the original sized fronts.
Top hinged doors
Read more
These door flaps have their hinge drillings along the long side and are opened upwards toward the ceiling. Please use the format Width x Height (not vice versa)
| Top Hinged Flaps | Size in mm | Price | |
|---|---|---|---|
| Top Hinged Flap Faktum Gloss 70×30 | 694×296 | 115,00 € | |
| Top Hinged Flap Faktum Gloss 70×40 | 694×396 | 125,00 € | |
| Top Hinged Flap Faktum Gloss 92×30 | 918×296 | 159,00 € | |
| Top Hinged Flap Faktum Gloss 92×40 | 918×396 | 175,00 € |
Not finding the size you are looking for? We make odd/ custom sizes as well
Read more
Not finding the perfect size that you are looking for? Not a problem. Besides all the original IKEA-sizes we are also able to make “any” size by the millimeter. This is a service for what we do not charge any extra.
Most kitchens need one or more fronts made in another size compared to the sizes originally offered by IKEA. Usually around the fridge/ freezer, oven, micro or the extractor hood etc. Cutting yourself on site will leave the new front without the paint and with a rough, cut edge. Since we produce on order we are able to make “any” size and this is a service for what we do not charge any extra. Please just add the closest larger front into the cart. Proceed to the Checkout page. There you will find a message text box. Please just mention the original size + your preferred measurements by the millimeter and in the format Width x Height (not vice versa). NO ROUNDING OF THE MEASUREMENTS. We will make the new front in the production exactly by the millimeter and it will not look cut or cropped. The selected color will be applied afterwards just like with the original sized fronts.
Step #4: Side Panels and Plinths etc
Step #5: SoftClosing Faktum Hinges
You may keep your existing Faktum hinges. But perhaps you would like to upgrade them as well to the modern and luxurious new hinges with SoftClose and SelfClose Technology built in. After all the old hinges must be removed from the old doors anyway. So now is a good time to upgrade!
| Image | Hinges for regular Faktum doors | Price | More info |
|---|---|---|---|
| Hinge for Faktum (SoftClose + SelfClose) | 12,95 € | Options | |
| Hinges for Faktum. SoftClose + SelfClose, Multipack | Options | ||
| Mounting plate for Faktum hinges | 5,50 € | Options |
| Image | Special purpose hinges | Price | More info |
|---|---|---|---|
| Connecting Bi-fold Door Hinge for a 90° Corner Cabinet | 25,00 € | Options | |
| Hinge for a Faktum Wall Corner Cabinet fitted in a 45° angle | 25,00 € | Options | |
| Hinge with an extra wide opening angle of 155° | 25,00 € | Options | |
| Stay-Lift Mechanism for Flaps/ Horizontal Doors | 49,00 € | Options |
Step #6: Cabinets, Drawers and Shelves for Faktum kitchens
New Cabinets and Cupboards for your IKEA Faktum Kitchen project. We also list Shelves and Drawers etc for Faktum.
Step #7: Doors and Fronts for IKEA Metod Kitchens
Yes, we also offer our premium doors and fronts for the Metod kitchen system currently sold by IKEA. Perhaps you would like to mix some new Metod doors into your existing Faktum kitchen? Please just continue and add Metod sized doors and fronts into your cart. Will be made in the same pattern + colour combination as the Faktum doors in the same cart.






