Hoge kast 50×217

Doors, Side Panels and Plinths etc are ordered separately and from the main Price & Ordering page. There you will also be able to choose the colour + pattern combination for the fronts. For this cabinet we suggest 1x Door 50x70.

This drawer is intended to be fitted at the very bottom of the cabinet. Requires an 50x70 drawer front. Fronts are ordered separately from the main Price & Ordering page. There you will also be able to choose the colour + pattern combination for the fronts.

Important: We suggest a set of new fronts are ordered along with the new drawers as fronts drilled for the older, original drawers will not fit these modern SoftClosing drawers. If new drawer fronts are ordered in conjunction with the new drawers they will be pre-drilled from the factory according to the new standard. All the other fronts will have the old drillings and will fit to the older drawers only.

This set consists of a tall drawer for pots and pans etc and one low cutlery drawer. The tall drawer is intended to be fitted at the very bottom of the cabinet and requires a 50x57 drawer front (or perhaps 1x 50x31 + 1x 50x25 that are connected together on site). The low drawer is intended to be fitted at the top of the 50x57 front and needs a 50x13 drawer front. Fronts are ordered separately from the main Price & Ordering page. There you will also be able to choose the colour + pattern combination for the fronts.

Important: We suggest a set of new fronts are ordered along with the new drawers as fronts drilled for the older, original drawers will not fit these modern SoftClosing drawers. If new drawer fronts are ordered in conjunction with the new drawers they will be pre-drilled from the factory according to the new standard. All the other fronts will have the old drillings and will fit to the older drawers only.

This set of 3 consists of 2 tall drawers for pots and pans etc and 1 low cutlery drawer. For a Set of 3 drawers the following fronts are needed: 1x 50x13 + 1x 50x25 + 1x 50x31. Fronts are ordered from the main Price & Ordering page. There you will also be able to choose the colour + pattern combination for the fronts.

Important: We suggest a set of new fronts are ordered along with the new drawers as fronts drilled for the older, original drawers will not fit these modern SoftClosing drawers. If new drawer fronts are ordered in conjunction with the new drawers they will be pre-drilled from the factory according to the new standard. All the other fronts will have the old drillings and will fit to the older drawers only.

This set consists of 5 low cutlery drawers. For a Set of 5 drawers the following fronts are needed: 4x Drawer Front 50x13 + 1x Drawer Front 50x18. Fronts are ordered from the main Price & Ordering page. There you will also be able to choose the colour + pattern combination for the front.

Important: We suggest a set of new fronts are ordered along with the new drawers as fronts drilled for the older, original drawers will not fit these modern SoftClosing drawers. If new drawer fronts are ordered in conjunction with the new drawers they will be pre-drilled from the factory according to the new standard. All the other fronts will have the old drillings and will fit to the older drawers only.