Scharniere *
Keine Scharniere 2x Scharniere + 2x Montageplatten 3x Hinges + 3x Mounting plates 4x Scharniere + 4x Montageplatten 5x Hinges + 5x Mounting plates 6x Hinges + 6x Mounting plates 10x Hinges + 10x Mounting plates 2 Satz mit Türscharniere mit SoftClose + SelfClose zu einem reduzierten Preis im Vergleich zur Einzelbestellung. Die Montageplatten, die mitgehört, werden in den Schrank eingebaut und anschließend werden die Scharniere mit einem „Klick“ an den Montageplatten befestigt. Türen müssen separat bestellt werden.
Doors, Side Panels and Plinths etc are ordered separately and from the main Price & Ordering page. There you will also be able to choose the colour + pattern combination for the fronts. For this cabinet we suggest 1x Door 50x70.
Böden *
Keine Böden 2x Böden 50x58 4x shelves 50x58 6x shelves 50x58 8x shelves 50x58 Set of shelves offered at a reduced cost compared to if ordered separately.
Schubladen *
Set mit 1 Schublade (ohne Front) Set mit 2 Schubladen (ohne Fronten) Set mit 3 Schubladen (ohne Fronten) Set mit 5 Schubladen (ohne Fronten) Keine Schubladen Jede Schublade enthält ein Paar hochwertige, leichtgängige Schienen mit integrierter Soft-Closing Technologie.
This drawer is intended to be fitted at the very bottom of the cabinet. Requires an 50x70 drawer front. Fronts are ordered separately from the main Price & Ordering page. There you will also be able to choose the colour + pattern combination for the fronts.
Important: We suggest a set of new fronts are ordered along with the new drawers as fronts drilled for the older, original drawers will not fit these modern SoftClosing drawers. If new drawer fronts are ordered in conjunction with the new drawers they will be pre-drilled from the factory according to the new standard. All the other fronts will have the old drillings and will fit to the older drawers only.
This set consists of a tall drawer for pots and pans etc and one low cutlery drawer . The tall drawer is intended to be fitted at the very bottom of the cabinet and requires a 50x57 drawer front (or perhaps 1x 50x31 + 1x 50x25 that are connected together on site). The low drawer is intended to be fitted at the top of the 50x57 front and needs a 50x13 drawer front . Fronts are ordered separately from the main Price & Ordering page. There you will also be able to choose the colour + pattern combination for the fronts.
Important: We suggest a set of new fronts are ordered along with the new drawers as fronts drilled for the older, original drawers will not fit these modern SoftClosing drawers. If new drawer fronts are ordered in conjunction with the new drawers they will be pre-drilled from the factory according to the new standard. All the other fronts will have the old drillings and will fit to the older drawers only.
This set of 3 consists of 2 tall drawers for pots and pans etc and 1 low cutlery drawer . For a Set of 3 drawers the following fronts are needed: 1x 50x13 + 1x 50x25 + 1x 50x31 . Fronts are ordered from the main Price & Ordering page. There you will also be able to choose the colour + pattern combination for the fronts.
Important: We suggest a set of new fronts are ordered along with the new drawers as fronts drilled for the older, original drawers will not fit these modern SoftClosing drawers. If new drawer fronts are ordered in conjunction with the new drawers they will be pre-drilled from the factory according to the new standard. All the other fronts will have the old drillings and will fit to the older drawers only.
This set consists of 5 low cutlery drawers. For a Set of 5 drawers the following fronts are needed: 4x Drawer Front 50x13 + 1x Drawer Front 50x18 . Fronts are ordered from the main Price & Ordering page. There you will also be able to choose the colour + pattern combination for the front.
Important: We suggest a set of new fronts are ordered along with the new drawers as fronts drilled for the older, original drawers will not fit these modern SoftClosing drawers. If new drawer fronts are ordered in conjunction with the new drawers they will be pre-drilled from the factory according to the new standard. All the other fronts will have the old drillings and will fit to the older drawers only.
Beine *
Verstellbare Beine Ca. 16 cm groß Keine Beine. (Die alten Beine passen nicht) Alle Wahlmöglichkeiten müssen mit Ja/Nein beantwortet werden, bevor das Produkt in den Warenkorb gelegt werden kann.
