Price & Ordering: The Faktum U12 Model

Handleless Cabinet Doors With Integrated J-pull Grips For IKEA Faktum Kitchens

  • On this page we list our handleless cupboard doors and fronts with integrated J-pull grips. The Model “U12” for IKEA Faktum kitchens.
  • Similar to the IKEA Voxtorp doors a recessed J-pull grip will be milled out from each front. This provides a modern, clean look with beautiful horizontal lines. No need to drill for knobs on site nor to clutter with bulky,  traditional pull handles.
  • These fronts are for the IKEA Faktum kitchen range that was discontinued from the IKEA warehouses back in 2013. Keep the kitchen you already own. Just replace the fronts!
  • The fronts will be made in the correct size by IKEA´s original drawings and pre drilled by IKEAs templates. They will all fit perfectly out of the box just as if they were picked up from the local IKEA warehouse.
  • All the fronts on this page are priced by their size, not by the selected colour. The chosen colour will show in the cart at €0.
  • This page may be utilised to price your project. Please just add all the needed sizes of the fronts into a cart and the system will calculate the total cost automatically. At the Checkout page you may finalise your order or save your cart for later.
  • On this page we list our handleless cupboard doors and fronts with integrated J-pull grips. The Model “U12” for IKEA Faktum kitchens.
  • Similar to the IKEA Voxtorp doors a recessed J-pull grip will be milled out from each front. This provides a modern, clean look with beautiful horizontal lines. No need to drill for knobs on site nor to clutter with bulky,  traditional pull handles.
  • These fronts are for the IKEA Faktum kitchen range that was discontinued from the IKEA warehouses back in 2013. Keep the kitchen you already own. Just replace the fronts!
  • The fronts will be made in the correct size by IKEA´s original drawings and pre drilled by IKEAs templates. They will all fit perfectly out of the box just as if they were picked up from the local IKEA warehouse.
  • All the fronts on this page are priced by their size, not by the selected colour. The chosen colour will show in the cart at €0.
  • This page may be utilised to price your project. Please just add all the needed sizes of the fronts into a cart and the system will calculate the total cost automatically. At the Checkout page you may finalise your order or save your cart for later.
U12 + Easy Grey
PT5004
U12 + Caffe Latte
PT5009
U12 + Alpine White

Step #1: Please select your preferred colour

Please choose your preferred colour here. The selected colour will apply to all the doors and the fronts as well as to the side panels and the plinths etc throughout your order. You only need to do this selection once, not for each and every front added to your cart. Please read this short article on how to order a two-tone kitchen.

Positioning of the integrated grips

Step #2: Drawer fronts

Add some drawer fronts to the cart. Will be made in the chosen colour from Step #1 above. The fronts are prices by the size, not by the colour. Listed in tabs by the outside width of the cabinet they are intended to be fitted to. Just like IKEA we make the fronts a few millimeter smaller compared to the width of the cabinet so they are possible to open and close properly. In fact they will be manuafactured to the correct size by IKEAs original drawings and pre-drilled for the original IKEA Rationell drawers according to IKEAs original templates. 

These new drawer fronts will fit in a 30 cm wide cabinet. Please use the format Width x Height (not vice versa).

For 30 cm wide cabinetsSize in mmPriceMake Choice
Drawer front Faktum 30×13295×12649,00 Options
Drawer front Faktum 30×18295×18253,00 Options
Drawer front Faktum 30×25295×25463,00 Options
Drawer front Faktum 30×31295×31069,00 Options
Drawer front Faktum 30×57295×56699,00 Options
Drawer front Faktum 30×70295×694119,00 Options

These new drawer fronts will fit in a 40 cm wide cabinet. Please use the format Width x Height (not vice versa).

For 40 cm wide cabinetsSize in mmPriceMake Choice
Drawer front Faktum 40×13395×12657,00 Options
Drawer front Faktum 40×18395×18259,00 Options
Drawer front Faktum 40×25395×25473,00 Options
Drawer front Faktum 40×31395×31079,00 Options
Drawer front Faktum 40×57395×566112,00 Options
Drawer front Faktum 40×70395×694129,00 Options

These new drawer fronts will fit in a 50 cm wide cabinet. Please use the format Width x Height (not vice versa).

For 50 cm wide cabinetsSize in mmPriceMake Choice
Drawer front Faktum 50×13495×12659,00 Options
Drawer front Faktum 50×18495×18263,00 Options
Drawer front Faktum 50×25495×25483,00 Options
Drawer front Faktum 50×31495×31089,00 Options
Drawer front Faktum 50×57495×566129,00 Options
Drawer front Faktum 50×70495×694149,00 Options

These new drawer fronts will fit in a 60 cm wide cabinet. Please use the format Width x Height (not vice versa).

For 60 cm wide cabinetsSize in mmPriceMake Choice
Drawer front Faktum 60×9595×9449,00 Options
Drawer front Faktum 60×13595×12659,00 Options
Drawer front Faktum 60×18595×18263,00 Options
Drawer front Faktum 60×25595×25483,00 Options
Drawer front Faktum 60×31595×31089,00 Options
Drawer front Faktum 60×57595×566129,00 Options
Drawer front Faktum 60×70595×694149,00 Options

These new drawer fronts will fit in a 80 cm wide cabinet. Please use the format Width x Height (not vice versa).

For 80 cm wide cabinetsSize in mmPriceMake Choice
Drawer front Faktum 80×13795×12679,00 Options
Drawer front Faktum 80×25795×25493,00 Options
Drawer front Faktum 80×31795×31099,00 Options
Drawer front Faktum 80×57795×566135,00 Options

These fronts are intended for integrated dishwashers. The only difference compared to regular doors or drawer fronts are the drillings. Since the front is fitted to the dishwasher door via the fittings supplied with the washer there is no need for pre-drilled holes for hinges since those holes will be left empty anyway. And an empty hole might take in moisture and ruin the front from behind. Please refer to the fitting manual that was supplied with the dishwasher on how to fit the front to your specific dishwasher. Please use the format Width x Height (not vice versa).

NameSize in mmNotePriceMake Choice
Dishwasher Frt 45×57445×566

Front for an integrated dishwasher.

129,00 Options
Dishwasher Frt 45×70445×694

Front for an integrated dishwasher.

139,00 Options
Dishwasher Frt 50×57495×566

Front for an integrated dishwasher.

129,00 Options
Dishwasher Frt 50×70496×694

Front for an integrated dishwasher.

149,00 Options
Dishwasher Frt 60×57595×566

Front for an integrated dishwasher.

129,00 Options
Dishwasher Frt 60×70595×694

Front for an integrated dishwasher.

149,00 Options

Step #3: Doors

Add some doors to the cart. Will be made in the chosen colour from Step #1 above. The fronts are prices by the size, not by the colour. Listed in tabs by the outside width of the cabinet they are intended to be fitted to. Just like IKEA we make the fronts a few millimeter smaller compared to the width of the cabinet so they are possible to open and close properly. In fact they will be manuafactured to the correct size by IKEAs original drawings and pre-drilled for the original IKEA FAktum hinges according to IKEAs original templates. 

These new doors will fit in a 15 or 20 cm wide cabinet. Please use the format Width x Height (not vice versa).

Left hinged/ right hinged? Please stand infront of the closed door. If the hinges are to the left (on the back side/ inside of the door), the door is left hinged and vice versa.

For 15-20 cm wide cabinetsSize in mmPriceSelect
Door Faktum 15×70145×69499,00 Options
Door Faktum 20×70195×694109,00 Options
Door Faktum 20×92195×918139,00 Options

These new doors will fit in a 30 cm wide cabinet. Please use the format Width x Height (not vice versa).

Left hinged/ right hinged? Please stand infront of the closed door. If the hinges are to the left (on the back side/ inside of the door), the door is left hinged and vice versa.

For 30 cm wide cabinetsSize in mmNotePriceSelect
Door Faktum 30×57296×566296×56699,00 Options
Door Faktum 30×70296×694

This door is not suitable for a corner cabinet

119,00 Options
Folding Door Faktum 30×70 A295×694

Paired double door for a corner cabinet. Part 1

119,00 Options
Folding Door Faktum 30×70 B295×694

Paired double door for a corner cabinet. Part 2

119,00 Options
Door Faktum 30×92296×918

This door will not fit a 45° corner cabinet.

149,00 Options

For Wall Corner CabinetsSize in mmNotePriceSelect
Door Faktum 32×70317×694

Door for a corner cabinet. Angle 45°.

119,00 Options
Door Faktum 32×92317×918

Door for a corner cabinet. Angle 45°.

149,00 Options

These new doors will fit in a 40 cm wide cabinet. Please use the format Width x Height (not vice versa).

Left hinged/ right hinged? Please stand infront of the closed door. If the hinges are to the left (on the back side/ inside of the door), the door is left hinged and vice versa.

For 40 cm wide cabinetsSize in mmPriceSelect
Door Faktum 40×57396×566112,00 Options
Door Faktum 40×70396×694129,00 Options
Door Faktum 40×92396×918169,00 Options
Door Faktum 40×125396×1245239,00 Options
Door Faktum 40×195396×1942285,00 Options

These new doors will fit in a 50 cm wide cabinet. Please use the format Width x Height (not vice versa).

Left hinged/ right hinged? Please stand infront of the closed door. If the hinges are to the left (on the back side/ inside of the door), the door is left hinged and vice versa.

For 50 cm wide cabinetsSize in mmPriceSelect
Door Faktum 50×57496×566129,00 Options
Door Faktum 50×70496×694149,00 Options
Door Faktum 50×92496×918189,00 Options

These new doors will fit in a 60 cm wide cabinet. Please use the format Width x Height (not vice versa).

Left hinged/ right hinged? Please stand infront of the closed door. If the hinges are to the left (on the back side/ inside of the door), the door is left hinged and vice versa.

For 60 cm wide cabinetsSize in mmPriceSelect
Door Faktum 60×35596×34293,00 Options
Door Faktum 60×57596×566129,00 Options
Door Faktum 60×70596×694149,00 Options
Door Faktum 60×90596×900189,00 Options
Door Faktum 60×92596×918189,00 Options
Door Faktum 60×125596×1245249,00 Options
Door Faktum 60×195596×1942295,00 Options

The horizontal doors are opened up towards the ceiling. The hinges are positioned on the top of the doors. Please use the format Width x Height (not vice versa). The drillings for the hinges will be along the first figure (the width).

NameSize in mmPriceMake Choice
Horizontal Door Faktum 70×30694×296119,00 Options
Horizontal Door Faktum 92×30918×296149,00 Options
Horizontal Door Faktum 70×40694×396129,00 Options
Horizontal Door Faktum 92×40918×396169,00 Options

WILL THE FRONTS BE PRE-DRILLED?

Yes. All the new doors will be pre-drilled for your IKEA Faktum hinges and all the new drawer fronts will be pre drilled for your IKEA Faktum/ IKEA Rationell drawers. They will all fit perfectly right out of the box.
Normally you must drill your new doors and fronts for the knobs or for the handles. But with the doors and fronts in the U12 range with integrated grips there is no need to drill at all which will save you time + money.

Step #4: Side Panels, Spacers and Plinths etc

Step #5: SoftClosing Faktum Hinges

All the new doors will be made, measured and pre-drilled according to the original IKEA drawings. The new doors will be delivered with a perfect fit to your current Faktum hinges. But perhaps you are looking for softclosing hinges that are associated to modern kitchens?

ImageHinges for regular Faktum doorsPriceMore info
Hinge for Faktum (SoftClose + SelfClose)
Hinge for Faktum (SoftClose + SelfClose)12,00 Options
Hinges for Faktum. SoftClose + SelfClose, Multipack
Hinges for Faktum. SoftClose + SelfClose, Multipack Original price was: 12,00 €.Current price is: 9,90 €.Options
Mounting plate for an IKEA Faktum hinge
Mounting plate for the hinges5,00 Options

Step #6: Cabinets and Cupboards for IKEA Faktum kitchens

New Cabinets and Cupboards for your IKEA Faktum Kitchen project. We also list Shelves and Drawers etc for Faktum.

Step #7: Doors and Fronts for IKEA Metod Kitchens

Yes, we also offer our premium doors and fronts for the Metod kitchen system currently sold by IKEA. Perhaps you would like to mix some new Metod doors into your existing Faktum kitchen? Please just continue and add Metod sized doors and fronts into your cart. Will be made in the same pattern + colour combination as the Faktum doors in the same cart.

Handleless new doors for IKEA kitchens. Faktum + Metod
U12 + Sand of Sahara
U12 + California Oak
U12 + Alpine White

See Our Colour Gallery

If you haven’t already we suggest you review our colour gallery with inspirational images first.

Item added to cart.
0 items - 0,00